|
Friction Less™ Products Contains:
|
| Superior lubrication is achieved electrochemically using advanced Oil Additives (ASOA). The additives found in our Advanced Synthetic Oils bind to all moving metal parts creating a smooth operating surface which reduces friction, this in turns reduces heat and thermal breakdown. |
|
Section II - Hazard Ingredients/Identity Information
Hazardous Components
(Specific Chemical Identity; Common Name(s)) |
OSHA PEL |
ACGIH TLV |
| Synthetic Hydrocarbon Base Stock Fluid |
500 ppm |
5mg/m3 |
| Synthetic Hydrocarbon Extreme Pressure Additive |
500 ppm |
5mg/m3 |
| Lubricity/Anti-Scuff Additive |
500 ppm |
5mg/m3 |
|
| |
| |
Section III - Physical/Chemical Characteristics
| Boiling Point |
460° F |
Specific Gravity (H2O = 1) |
1.07 |
| Vapor Pressure (mm Hg.) |
< 1 @ 770 F |
Melting Point |
NA |
| Vapor Density (AIR = 1) |
NA |
Evaporation Rate
(Butyl Acetate = 1) |
< 0.01 |
|
| |
| Solubility in Water |
Insoluble |
| Appearancer |
Medium to Dark Amber |
| Odor |
Mild Oil Odor |
|
Section IV - Fire and Explosion Hazard Data
| Flash Point (Method Used) 439° F |
|
|
UEL
NA |
| Extinguishing Media |
Chemical, CO2, Foam, Waterfog
|
| Special Fire Fighting Procedures |
Use Self Contained Breathing Apparatus in confined or closed areas |
| Unusual Fire and Explosion Hazards |
Handle and treat as oil – non-explosive and non-flammable under normal conditions |
|
| |
| |
| |
Section V - Reactivity Data
Stability |
Stable |
Conditions to Avoid |
| Incompatibility (Materials to Avoid) |
Strong Oxidizers |
Open Flames and Molten Temperatures |
| Hazardous Decomposition or Byproducts |
Carbon dioxide, carbon monoxide, various hydrocarbons and HCl if combustion is not complete |
|
| Hazardous Polymerization |
Will Not Occur |
None Known |
|
| |
| |
| |
Section VI - Health Hazard Data
| Route(s) of Entry: |
Inhalation?
NO |
Skin?
NO |
Ingestion?
YES |
Health Hazards (Acute and Chronic) Ingestion of product may produce nausea and vomiting, but no long-term effects.
|
| |
| Carcinogenicity: |
NTP?
NO |
IARC Monographs?
NO |
OSHA Regulated?
NO |
| Signs and Symptoms of Exposure |
Mild irritation of eyes; the toxicity profile shows excessive inhalation of vapors can cause nasal and respiratory irritation, dizziness, fatigue, headaches and nausea.
|
| Medical Conditions |
None Known |
| Emergency and First Aid Procedures |
EYES: Immediately flush with large quantities of water for at least 15 minutes and call a physician if irritation persists.
SKIN: Wash thoroughly with soap and water.
INHALATION of combusted fumes: Remove exposed person to fresh air.
INGESTION: Call a physician. Do NOT induce vomiting. |
|
| |
| |
| |
Section VII - Precautions for Safe Handling and Use
| Steps to Be Taken in Case Material is Released or Spilled |
Prevent discharge to streams and sewers. Notify Appropriate agencies.
|
| Waste Disposal Method |
Dispose of in accordance with all federal, state, and local regulations. |
| Precautions to Be taken in Handling and Storing |
Keep away from food and feed products. Do not store near flame, cutting, welding, or ignition sources. |
| Other Precautions |
Remove and launder contaminated clothing. Do not store in temperatures in excess of 150° F. |
|
| |
| |
| |
Section VIII - Control Measures
RESPITORY PROTECTION
| Ventilation |
Local Exhaust
Not normally required
|
|
| If TLV is exceeded, use NIOSH/OSHA approved respirator. |
Mechanical (General)
Not required
|
|
Protective Gloves
|
Neoprene or Nitrile Rubber
|
| Eye Protection |
Safety Goggles or face shield
|
| Other Protective Clothing or Equipment |
NONE |
Work/Hygienic Practices
|
Wash thoroughly after use or contact.
Use good hygienic practices.
|
|
| |
| |
| |
Section IX - Special Precautions
PRECAUTIONS TO BE TAKEN IN HANDLING & STORING NFPA RATING
|
Health |
Fire |
Reactivity |
Special |
1 |
1 |
0 |
0 |
DOT ID #:
|
|
DOT LABEL REQUIRED: |
|
HAZARD CLASS: |
|
PACKING GROUP: |
NA |
FREIGHT CLASSIFICATION: |
Lubricating oil |
|
| |
| |
| |
LITHIUM GREASE MATERIAL SAFETY
D A T A S H E E T
|
| Product Name |
Address |
| Frictionless Lithium Grease |
Phirefly Enterprises, Inc.
18630 S.W. 98 Ave.
Cutler Bay, FL 33157 |
| Chemical Name |
Chemical Family |
| Lithium Hydroxy-Sterate Lubricating Grease |
Hydrocarbon |
|
|
MATERIALS OR COMPONENTS |
%W |
CAS # |
CARCINOGEN OSHA or IARC |
Lithium Hydroxy-Sterate(Soap)
|
|
|
|
| Mineral Oil |
80 |
|
|
| Zinc Oxide |
5 |
|
|
| Extreme Pressure Additive |
5 |
|
|
|
SHIPPING INFO |
|
PHYSICAL PROPERTIES |
| Boiling Point |
|
| Melting Point |
N/A |
| Freezing Point |
N/A |
| Molecular Weight (Calculated) |
N/A |
| Specific Gravity (H2O=1) |
@ 0.88 |
| Vapor Pressure(mm Hg) |
N/A |
| Vapor Density |
|
| Solubility in H2O |
NIL |
| % Volatiles By Volume |
0 |
| Appearance and Color |
Light Amber-Bland |
|
|
|
